SPEEDTEX CONING OIL KPD317
SPEEDTEX CONING OIL KPD317
This product is a semi-synthetic special coning oil with anti-static and anti-splash properties, which is blended with paraffinic & synthetic base oils and special additives, to be used in yarn transfer processes in polyester and polyamide yarns running on fast machines.
Usage
All kinds of polyester and polyamide yarns, optionally, Speedtex Coning Oil KPD 317 can be used without mixing with water directly or by making emulsion by mixing it slowly with water at an optimum usage rate of 1-5% according to operating conditions. Since the emulsion stability will be provided properly with water in the hardness range of 5-20 dH (German Hardness), water in this range should be preferred for emulsion and washing.
Properties
- Product waste due to oil splashes is reduced.
- It reduces oil drips in the thread guides.
- It gives the yarn a lubrication feature.
- Provides antistatic protection, prevents ruptures, supports the project cost positively.
- It is easily removed from the fabric during washing.
- Stable during storage.
- It supports the lubrication performance while reducing consumption thanks to its non-splashing feature. It also supports occupational safety as it prevents the slippery floor in the working environment.
Technical Properties
Appearance |
VISIUAL |
Clear & Bright & Light Yellow |
Emulsion Appearance |
VISIUAL |
Milk White |
Kinematic Viscosity 40 ˚C, cSt |
ASTM D 445 |
27,2 |
Emulsion pH /%5 |
ASTM D 1287 |
7,5/7,43 |
Flash Point, COC, ˚C |
ASTM D 97 |
192 |
Density, 15 ˚C, g/ml |
ASTM D 4052 |
0,86 |
* Data given above are typical properties and may vary slightly.
REV 00 MARCH 2021