SHIP LAUNCHING SLIP COAT
SHIP LAUNCHING SLIP COAT
Speedol Ship Launching Slip Coat is protective and the slider feature at sleds used by applying onto the Speedol Ship Lauching Base Coat as a second layer by melting or directly brushing.
Usage
It is applied in ships launched sleds onto the base coat in the shipyards.
Properties
- High Slider Feature:Serving as a preservative in sled to fulfill its function without breaking the base coat and above enables the increase of slider.
- Rust, oxidation and high resistance against sea water feature: It is resistant to oxidation, rust and seawater. But not mix with sea water.
Technical Properties
COLOR |
- |
BROWN |
DROPPING POINT, °C |
ASTM D 566 |
95 |
NLGI |
- |
2 |
PENETRATION (25 °C, 1/10mm) |
ASTM D 217 |
265-295 |
*Data given above are typical properties and may vary slightly.
SHIP LAUNCHINGS SLIP COAT TO BE CONSIDERED:
Take care of this product while pouring / applying with brush to prevent cracking of ship launchings base coat.
- Sled should well cleaned,
- Not boil, maximum 70 ° C melt must be spilled.
- It should not be applied in windy weather.
- It should not be applied to wet and damp surfaces.
REV03 JUNE 2022